Draytek VigorAP 810 AP810-K Dual-Band Wireless AP Access Point Wave 2 Front View
Draytek Vigor AP810 AP810-K Wireless Access Point Side View Showing LAN and Poe Ports
Draytek Vigor AP810 AP810-K Wireless Access Point Side View Showing Bridge Mode
Draytek Vigor AP810 AP810-K Wireless Access Point Side View Showing PoE Usage
Draytek Vigor AP810 AP810-K Wireless Access Point Side View Showing Wireless Extender Mode
Draytek Vigor AP810 AP810-K Wireless Access Point Side View Showing Wireless Repeater Mode
Draytek Vigor AP810 AP810-K Wireless Access Point Side View Showing Provisioning Settings
Draytek Vigor AP810 AP810-K Wireless Access Point Side View Showing Temperature Settings
Draytek Vigor AP810 AP810-K Wireless Access Point Side View Showing ACS View

DrayTek VigorAP810 WLAN Access Point


Regular price £101.99 Sale


DrayTek VigorAP 810 Managed PoE Wireless Access Point

  • Business-class 802.11n WLAN access point
  • 2.4GHz 802.11n 300Mbps Wireless LAN
  • Dual isolated LAN interfaces
  • 4-Port Ethernet Switch
  • Wireless Encryption : WEP, WPA, WPA2

DrayTek VigorAP 810 Managed PoE Wireless Access Point

Managed 802.11n Business-class 2.4GHz Wireless Access Point
The DrayTek Vigor AP-810 is a standalone wireless access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features. It can also be used as part of the DrayTek managed wireless system (see details here). The AP-810 replaces our popular AP-800 model, adding full compatibility with our managed wireless platform.

Business-class 802.11n WLAN 2.4GHz wireless access point
Manageable by DrayTek Wireless Management
Can be powered by supplied PSU or standard 802.3af PoE (Power-over-Ethernet)
Up to 300Mbps Wireless LAN
5 Ethernet Ports for AP mode or for Wireless Bridging
Detachable Antennae - Can be replaced with uni-directional or higher-gain
Up to four distinct SSIDs (for VLANs)
802.1q VLAN Tagging for each SSID & Management
Wireless Security & VLANs
Wireless Security & VLANs
The AP-810 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access.

For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which allows you to centrally manage and store user names and passwords either within the AP-810 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required.

The Vigor AP-810 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) and broadcast each on its own SSID.



Central Management with DrayTek VigorACS

The DrayTek VigorAP 810 can be managed by the DrayTek VigorACS central management system - a cloud platform which can manage most DrayTek products - routers, wireless access points and Ethernet switches, giving you complete visibility and control of your DrayTek product estate, even without a DrayTek Vigor router on site.

The DrayTek VigorACS management system can be used to configure and provision DrayTek VigorAP access points, similarly to performing these actions through the VigorAP's web interface, with a familiar menu layout in the Configuration section of VigorACS.

Profiles for groups of access points can be provisioned in VigorACS by selecting a VigorACS network, then accessing Configuration > AP Profile to configure profiles and apply them selectively.

DrayTek's VigorACS management monitors the VigorAP 810, with a Dashboard view giving a central overview of the most important information from the VigorAP's current status.


Central Management with a DrayTek Router

The VigorAP 810 can operate in standalone autonomous mode, but can also form part of a centrally managed wireless installation by adding a compatible DrayTek wireless controller such as the Vigor 2862 router. This enables you to centrally control, manage and administer multiple AP devices installed around your building/campus. Management also enables efficient usage of your wireless access point through load-balancing, whereby wireless clients are distributed across several access points to reduce congestion.

The DrayTek router operating as the wireless controller can provision DrayTek VigorAP access points using the Central AP Management profiles configured on the router, with an option to Auto Provision - auto configuring newly installed VigorAP access points with the Auto Provisioning profile, upon initial connection to the DrayTek Vigor router's network.


The AP-810 supports PoE (Power over Ethernet) as standard (built-in) so if the AP-810 is connected to a PoE enabled Ethernet switch or PoE injector, you don't need any local power to the unit (power supply) - the AP-810 will take its power from the Ethernet cable. This is ideal for situations where you do not have mains power available in the exact location where you want to install the AP-810 or just for general aesthetic neatness, perhaps where the AP-810 is installed somewhere prominent.

Local Temperature Logging and Alarm

As your VigorAP unit(s) will be distributed around your building, it's an ideal opportunity to also gather environmental information about those locations. By the addtition of an optional USB temperature sensor, your VigorAP 810 can report real-time local temperature information, show the previous 24 hour's chart and also set high/low alarms to alert/log if the temperature falls above or below your set levels.

This facility is ideal for detecting if any part of your building is over or under-heated or if heating/cooling has been left on overnight and therefore helping to make more efficient use of your heating or cooling energy consumption, potentially saving cost.

The VigorAP 810's USB interface can alternatively connect to a regular printer. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home/office by using a pair of VigorAP 810s to make a bridge.

Technical Specification (UK Hardware Spec.)

  • IEEE 802.11b/g/n 
  • Frequency Band 2.4 GHz
  • Wireless Encryption : WPA2 (802.11i) Encryption (WPA/WEP also supported but not recommended)
  • LAN Interfaces : 4 x 10/100BaseT Ethernet (LAN A), 1 x 10/100BaseT Ethernet (LAN B)
  • USB 2.0 Interface - for printer server
  • PoE (Power Over Ethernet - Standard 48v IEEE 802.3af) or mains powered (PSU included)
  • User Authentication : 802.1x (Requires Radius Server) (MD5/PEAP Modes)
  • Radius / WPA User Authentication
  • 802.1x User Authentication
  • Repeater/Bridge/Access Point/Station Modes
  • Wireless Client Status List in WUI
  • Wireless Client Isolation
  • Up to four distinct SSIDs (for VLANs)
  • Dual isolated LAN interfaces (LAN-A & LAN-B)
  • 802.1q VLAN per SSID & Management
  • Management VLAN
  • Bandwidth management per SSID
  • Hidden SSID
  • MAC Address Filtering (ACL)
  • WDS (Wireless Distribution System)
  • WMM (Wireless MultiMedia)
  • Optional USB Thermometer
  • WPS - WiFi Protected Setup
  • Built-in Site Surveyor
  • Built-in DHCP server
  • Wireless Transmit Power : Max 18 1dBm
  • Temperature Operation : 0 ° C to 40 ° C
  • Humidity: 10% to 90 % (Non-condensing)
  • Physical Dimensions: 112 x 132 x 42 ( W x H x D ) mm
  • Weight : 0.255kg (main unit, including Aerials)
  • Wall Mountable
  • Pack Contents : AP810 main unit, two aerials, PSU (220-240VAC), quick start guide, manual on CD-Rom
  • Power : 12VDC via AC/DC PSU (supplied) or 802.3af PoE (PoE switch or injector required)
  • Warranty
    • Two (2) Years RTB
    • Optional VigorCare Enhanced Warranty Available
      • VigorCare A3 3 Year Subscription: VCARE-A3
      • VigorCare A5 5 Year Subscription: VCARE-A5