Ubiquiti U6-IW UniFi In-Wall WiFi 6 PoE Access Point 5.3Gbps AX
Ubiquiti U6-IW UniFi In-Wall WiFi 6 PoE Access Point 5.3Gbps AX
Ubiquiti U6-IW UniFi In-Wall PoE WiFi 6 Access Point Wireless AX5300
The Ubiquiti U6-IW UniFi In-Wall WiFi 6 PoE Access Point is a dual-band, wall-mounted access point, with four (4) GbE RJ45 ports, that brings plug-and-play WiFi 6 to your home or office. One of the U6-IW's ports also supports PoE output so you can connect and power a device via Ethernet. With its 2.4 and 5 GHz WiFi 6 bands, the U6-IW offers an aggregate, over-the-air throughput rate of 5.3 Gbps, which can support over 300 clients. The U6-IW is also Bluetooth-compatible so it can be set up in minutes and managed from anywhere via the UniFi Network web application or mobile app.
Key Features
- High-efficiency, four-stream WiFi 6 technology.
- 5 GHz WiFi 6 band (4x4 MU-MIMO and OFDMA).
- 2.4 GHz WiFi 6 band (2x2 MU-MIMO).
- Four (4) GbE RJ45 ports, including one that supports PoE output.
- 300+ client capacity.
- Simple, Bluetooth-powered setup via the UniFi Network web application or mobile app.
- 6 spatial streams
- 115 m² (1,250 ft²) coverage
- Powered using PoE/PoE+*
- GbE uplink
Share
Explore Further
Highlights
Dual-band WiFi 6 (802.11ax) capability.
Up to 4.8 Gbps over the air speed via the 4x4 5GHz channel.
Up to 573.5 Mbps over the air speed via the 2x2 2.4GHz channel.
300+ concurrent client support.
Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion.
Universal mounting plate, backing plate, and screw kit included.
Managed with UniFi Network Application Version: 6.1.56 or higher.
Ceiling-mounted WiFi 6 AP with 6 spatial streams designed for large offices.
6 spatial streams
140 m² (1,500 ft²) coverage
350+ connected devices
Powered using PoE
GbE uplink
Dimensions and Weight
Width 197 mm, Depth 35 mm, Height 197 mm,Weight 1.4 kg
Specification
Mechanical
Dimensions 139.7 x 96 x 31.2 mm (5.5 x 3.8 x 1.3")
Weight 460 g (1 lb)
Enclosure material Plastic, aluminum
Mount material Aluminum
Hardware
Networking interface (1) Data-in: GbE RJ45 port
(4) Data-out: GbE RJ45 ports
Management interface Ethernet
Bluetooth
PoE interface (1) PoE in (PoE output not used)
(1) PoE out (Requires a PoE+ switch)
Power method PoE
PoE+ (Required for PoE output)
Power supply UniFi PoE switch
48V, 0.5A PoE adapter (Optional)
Max. power consumption 13.5W (Excluding PoE output)
Max PoE wattage per port by PSE 15.4W*
*Requires a PoE+ switch
Voltage range PoE mode 44—57V DC
Max. TX power
2.4 GHz
5 GHz
6 GHz
22 dBm
26 dBm
–
MIMO
2.4 GHz
5 GHz
6 GHz
2 x 2 (UL MU-MIMO)
4 x 4 (DL/UL MU-MIMO)
–
Throughput rate
2.4 GHz
5 GHz
6 GHz
573.5 Mbps
4.8 Gbps
Antenna gain
2.4 GHz
5 GHz
6 GHz
5 dBi
5.9 dBi
–
LED White/blue
Button Factory reset
Mounting Wall (Included)
Ambient operating temperature -30 to 60° C (-22 to 140° F)
Ambient operating humidity 5 to 95% noncondensing
Certifications CE, FCC, IC
Software
WiFi standards 802.11a/b/g/n/ac/ax
Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID 8 per radio
VLAN 802.1Q
Advanced QoS Per-user rate limiting
Guest traffic isolation Supported
Concurrent clients 300+
Zero-wait DFS Yes*
*Supported with upcoming firmware versions.
Supported Data Rates
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
Application Requirements
UniFi Network Version 6.4.52 and later
Warranty Information
Please check the Specification Section for Warranty Information
Extended Warranty
Care for your DrayTek with VigorCare Extended Warranty !
DrayTek Extended Warranty Matrix Support Model
VigorCare Enhanced Warranty Service
Advanced Replacement
If you suspect that your covered DrayTek product has developed a fault, our experienced support technicians will help you to diagnose the problem and determine whether the unit needs to be service or replaced. If it does, a replacement unit will be sent out the same day for delivery on the next working/business day (to most of the UK). If you wish to take the unit yourself to the service centre (currently North of London), replacement or diagnosis/repair can be carried out in person.
3 or 5 Year Warranty
With VigorCare, you also have the benefit of an extension to a full 3 or even 5 years of warranty so that if a fault does develop, you will have no bills for parts, labour or replacement in the event that a warranty fault develops. We're proud of the reliability that DrayTek products achieve but however unlikely a problem might be, if your business depends on your DrayTek product, VigorCare should give you the peace of mind and convenience that you need.
VigorCare membership is subject to the VigorCare Terms & Conditions (see terms tab, above) and should be taken out within 6 months of purchase of your new product
VigorCare Service Packs
VigorCare subscription is available for several categories of product. Determine the correct pack for your product below. NOTE: The subscription must be activated via the link below within 6 months of your router and service pack being purchased.
VigorCare Activation Link
https://www.draytek.co.uk/support/vigorcare-registration
Warranty Terms & Conditions Apply - please see here
https://www.draytek.co.uk/support/vigorcare#terms-and-conditions